The waste plastics that have been selected and examined can be put into the crusher for crushing and cleaning. Generally, the crusher is used to wash the crest, and a cradling machine supports a stand about 1.5 meters in height. A bucket is placed on the crusher and the bucket contains alkali. Solution or detergent, using a flow-controlled tube to introduce the detergent into the crusher, so that during the crushing process, the detergent (while additionally requiring a pipe to add fresh water) and the waste plastic are fully rubbed in the crusher. The crushed material from the crusher goes directly into the cleaning tank. The cleaning tank is generally larger than 8 meters in length, 1.2 meters wide and 1 meter deep. The bottom of the tank is drain holes. The cleaning tank needs to install 3 to 4 guide crushed membrane materials. The flow guiding device and the flow guiding device can distribute 10 or so ∮ 4 holes on one side of the 6-piece pipe. When the water in the pipe spouts the crushed material rushed onto the water, it forms an orientation. Flow, place automatic feeder on the other side of the cleaning tank, so that the crushed material coming from the directional flow is sent to the drainage area to be processed through the automatic feeder.
Copyright © 2020 Suzhou Beakeland Machinery Co., Ltd. All rights reserved.